Work done by a cell: W = QV animation
An animation that plays by itself on a loop: work done by a cell: W = QV.
Current of electricity · covers the O-Level, IGCSE, GCSE topic
Use it in your lessons
- Try it here: anyone can unlock 2 figures free, and a free account unlocks up to 5. Runs on a laptop, a Chromebook or a phone; nothing to install.
- Present it and share student links with the teacher plan, from US$5 a month, billed yearly.
- Put it on your own website or LMS for US$9, paid once, or every sim from US$29 a month.
Free guide: 12 practicals as sims, and how to run one in a lesson →
Need a version for your exact set-up? Have one made: US$49 a figure in an order of 5.
More physics sims
- Digital calipers: outside, inside and depth simClose the jaws on a rod, open them in a pipe, push the depth rod into a hole, find and correct the zero error, and choose between a rule, calipers and a micrometer.
- Digital micrometer screw gauge: zero it, then measure a wire simFind and correct a positive or negative zero error, close the jaws on a wire with the ratchet, measure the diameter at three places, average, and work out A = πd²/4.
- EM spectrum explorer: radio waves to gamma rays simDrag a slider along the spectrum on a log scale: λ and f change in opposite directions while c stays 3.0 × 10⁸ m/s, and each band shows its source, detector, uses and dangers.
- Free-body diagram builder simDrag weight, normal contact, tension, friction, air resistance, driving force and push onto a book, a lamp, a box, a parachutist, a lift, a car and two joined blocks; set each size, check the diagram, and see the resultant and the motion it predicts.
- Friction: pulling a block with a newton-meter simPull a block with a newton-meter: friction matches the pull until the block slips, then drops to a smaller sliding friction. Change the surface, oil it, add masses, and plot friction against the normal force.
- Image in a plane mirror simFind the image of a pin in a plane mirror by moving a search pin until there is no parallax, or with two sight lines, then measure u and v with a rule and plot v against u.